MC4 Connector Shortage
Windsun
Solar Expert Posts: 1,164 ✭✭
According to the factory rep, MC4 connector parts are backordered 16 weeks now due to a tooling failure in the Swiss factory as of March 2010.
Comments
-
Re: MC4 Connector Shortage
Is that the only factory for the world of PV OEM's, or for add-in cables onlyPowerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-Lister , -
Re: MC4 Connector Shortage
it is a good thing that i make my own cables then.
Cheers...
Damani -
Re: MC4 Connector ShortageIs that the only factory for the world of PV OEM's, or for add-in cables only
It is apparently the only factory for all the MC4 connectors and parts in the world. -
Re: MC4 Connector Shortage
Ain't sole sourced parts (probably patented to prevent alternate manufacturers) in a global economy wonderful... :roll:
-BillNear San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset -
Re: MC4 Connector Shortage
This is not good... how did "we" end up with only one supplier in the world? No wonder the damn things are expensive. Anyone have an injector molder in there basement? -
Re: MC4 Connector Shortage
who did they pay off to get the 'standard' set that one MUST use MC$'s???
Eric
KID #51B 4s 140W to 24V 900Ah C&D AGM
CL#29032 FW 2126/ 2073/ 2133 175A E-Panel WBjr, 3 x 4s 140W to 24V 900Ah C&D AGM
Cotek ST1500W 24V Inverter,OmniCharge 3024,
2 x Cisco WRT54GL i/c DD-WRT Rtr & Bridge,
Eu3/2/1000i Gens, 1680W & E-Panel/WBjr to come, CL #647 asleep
West Chilcotin, BC, Canada -
Re: MC4 Connector Shortage
There is no hard and fast rule that MC4 connectors must be used, other mfg's make acceptable types, such as the Tyco SolarLok, The problem is that most major mfg's have settled on the MC4 type. -
Re: MC4 Connector Shortage
smell of BIG $$$$$ is in the air....
ej
KID #51B 4s 140W to 24V 900Ah C&D AGM
CL#29032 FW 2126/ 2073/ 2133 175A E-Panel WBjr, 3 x 4s 140W to 24V 900Ah C&D AGM
Cotek ST1500W 24V Inverter,OmniCharge 3024,
2 x Cisco WRT54GL i/c DD-WRT Rtr & Bridge,
Eu3/2/1000i Gens, 1680W & E-Panel/WBjr to come, CL #647 asleep
West Chilcotin, BC, Canada -
Re: MC4 Connector Shortage
I don't buy this ... many manufactures listed here for MC4
http://www.alibaba.com/showroom/mc4_solar_connector.html
and this is an actual manufacture of MC4's
http://www.nova-group.cn/solar-connector/PV-Cable-coupler-PV-ST01-M-PV-ST01-F.html
Now where wind-sun buys from ( distributor ) maybe having supply issues, but its not only made in one factory in the entire world .. if it was RE world would be all over this.
I couldn't find any Google hit on the tool broken story either and the only hit for MC4 shortage is this thread, none anywhere else -
Re: MC4 Connector Shortage
This report of a shortage was also on the Wrenches List.
I have no idea of its truth or consequences.
boB -
Re: MC4 Connector ShortageSolar Guppy wrote: »I don't buy this ... many manufactures listed here for MC4
http://www.alibaba.com/showroom/mc4_solar_connector.html
I couldn't find any Google hit on the tool broken story either and the only hit for MC4 shortage is this thread, none anywhere else
All of those are made in China, and there appears to be some issue there also, not sure what it is - but in the past week we have gotten two inquiries from Chinese companies looking to buy those specifically made by MultiContact on the order of 10's of thousands.
Perhaps it is just a general shortage of certain types, but a test a while back (2008?) in one of the electronics magazines (IEEE digest?) showed that most of the Chinese ones failed to meet UL specs.
Aside from that, it is quite possible that the MC rep we talked to is full of it and is just making excuses for a non-delivery screwup for connectors that we ordered back in January. Perhaps there actually no "broken machine" but they oversold to Chinese mfg's and all we get is excuses because we only buy a few 1000 a year.
And why am I not surprised that there is no US manufacturer of them...
Categories
- All Categories
- 222 Forum & Website
- 130 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 191 Solar Information links & sources, event announcements
- 887 Solar Product Reviews & Opinions
- 254 Solar Skeptics, Hype, & Scams Corner
- 22.3K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 425 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 651 Solar Water Pumping
- 815 Wind Power Generation
- 622 Energy Use & Conservation
- 608 Discussion Forums/Café
- 302 In the Weeds--Member's Choice
- 74 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed