MPPT60 FAULT code F71

zxmedic
zxmedic Registered Users Posts: 3 ✭
in Off Grid Solar & Battery Systems #1
I am new here  hello all 

I've been  getting  Fault code F71 on my solar controler at night or when gen is charging my battery bank   the code only last a few secs . Cabling is correct size Batts all test great on the specific gravity   anyone run into this issue and a Fix ? 
· Share on Twitter

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #2
    several companies make a MPPT60..   What is yours ?   What does your manual say F71 is ??
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter
  • zxmedic
    zxmedic Registered Users Posts: 3 ✭
    #3
    Schiender  the code states DC overload 
    · Share on Twitter
  • zxmedic
    zxmedic Registered Users Posts: 3 ✭
    #4
    I've found a post on this sort of issue and it possible needs a firmware update  ?  
    · Share on Twitter

Categories