Battery charging

oadkins
oadkins Registered Users Posts: 19 ✭✭
in Off Grid Solar & Battery Systems #1
Charge regulator getting hot and panel wires burn end off the is 100 watt meter progressing 29watts what to check first 8 gage wire old 100watt panels
· Share on Twitter

Comments

  • Photowhit
    Photowhit Solar Expert Posts: 6,006 ✭✭✭✭✭
    #2
    How are they wired, and how many, what charge regulator (Charge controller?)

    I worry you have  series wired into a PWM charge controller, or have too much current for the model charge controller... So as much information as possible please.

    Home system 4000 watt (Evergreen) array standing, with 2 Midnite Classic Lites,  Midnite E-panel, Magnum MS4024, Prosine 1800(now backup) and Exeltech 1100(former backup...lol), 660 ah 24v Forklift battery(now 10 years old). Off grid for 20 years (if I include 8 months on a bicycle).
    - Assorted other systems, pieces and to many panels in the closet to not do more projects.
    · Share on Twitter
  • oadkins
    oadkins Registered Users Posts: 19 ✭✭
    #3
    System has been working for four years just had to put new charge controller on because of. burnt wires .I use m we charge controler


    · Share on Twitter
  • BB.
    BB. Super Moderators, Administrators Posts: 33,641 admin
    #4
    Do you have loose connections, water/humidty caused corrosion? Using any Aluminum wiring?

    I have seen fine copper wire that seems to corrode much worse that solid or course stranded copper wire (especially over time and higher temperatures)...

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter

Categories