XW6048, MPPT60 Parameters to sell excess power to grid

Options
Horacio060
Horacio060 Registered Users Posts: 3 ✭
in Off Grid Solar & Battery Systems #1
I have the followings parameters values:

Inverter XW6048                            MPPT60
Grid Support - Enabled                  Bulk Volts - 58.1
Grid Support Volt - 64V                  Absorb Volts - 58.1
2 Stage Charging                           Float Volt - 54.0
Sell - Enabled                                 3 stage Charging
Bulk Volts - 58.1                             ReCharge Volt - 51.0
Absorb - 58.1
Float - 54.0
ReCharge Volt - 51.0

Please let me know if I have to change one of them.
Sometimes even we have a bright sun the MPPT60 shows they are producing 350Watts and almost selling 0 to the grid. If I turn off the 60 amps breaker of the MPPT60 and turn it on the production increase to over 3,500Watts and increase the watts sent to the grid. I have 16 360Watts PV's connected to 2 MPPT60.
Appreciate your comments
· Share on Twitter

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #2
    Options
    Your Battery voltage likely needs to be larger than Grid Support Volt
    else how does your system get to the Grid Support Volt ?
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter

Categories