XWPro firmware and Gateway simultaneous update firmware for grid and AC couple issues.

Over the weekend new firmware was made available on the Schneider site for some bug repairs and improvements. For Offgrid applications, I would wait unless your issue is listed below. This was a simultaneous release and so both firmware need to be done. As always with firmware on an inverter, insure that your power source is not the inverter being updated. It will cycle AC out.


"we go where power lines don't" Sierra Nevada mountain area
   htps://offgridsolar1.com/
E-mail offgridsolar@sti.net

Comments

  • Dave Angelini
    Dave Angelini Solar Expert Posts: 6,731 ✭✭✭✭✭✭

    Where can I download the firmware?

    You can download the latest firmware (zip file) from the below links. Please scroll down to Downloads and click on Firmware.

    Note: There are required changes to the XW Pro firmware upgrade instructions. Once downloaded, please unzip and read the step-by-step guide, "READ ME FIRST_XWPro Amended Firmware Upgrade Procedure_v1" before updating the firmware.

    "we go where power lines don't" Sierra Nevada mountain area
       htps://offgridsolar1.com/
    E-mail offgridsolar@sti.net

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    Is this the Gateway firmware fix that lets you recover a bricked device ?
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

  • Dave Angelini
    Dave Angelini Solar Expert Posts: 6,731 ✭✭✭✭✭✭
    No Mike, the recovery bootloader was in 1.07 and later. How is the smoke up there? Still pretty bad down here. They closed Yosemite.


    "we go where power lines don't" Sierra Nevada mountain area
       htps://offgridsolar1.com/
    E-mail offgridsolar@sti.net

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    We are getting wind from different directions, and so the smoke varys quite a bit., last night was  7 on the airnow gov site, day before it was +300 (really bad)
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

  • Dave Angelini
    Dave Angelini Solar Expert Posts: 6,731 ✭✭✭✭✭✭
    Sorry to hear that Mike. You inside a cocoon I hope. We just leave the heat pump on at night and pressurize the house to insure it stays out. We run a merv 13 in a box fan to keep the air good from opening and closing doors. Nasty business in the West this year, more than I expected for sure. Those with home insurance are really going to shell it out. They know there are not enough fire people.

     Our local weather is weird because the Sierra mountains make its own up slope day wind and downslope at night.The north westerlies are too weak down here and the normal inversion layer of September is just no bueno.
    "we go where power lines don't" Sierra Nevada mountain area
       htps://offgridsolar1.com/
    E-mail offgridsolar@sti.net