Conext SW4024 Usage
I have had the SW4024 for a several months and have used it in a few different ways; standby as a UPS that keeps batteries in Float and in AC Support that uses battery power along with grid during the day when the array is producing power. My current mode is to have the AC Support function enabled during the day, array producing, and disabled manually when the sun goes down. I have had the Combox installed for a few months and that has shown me more detail. So far my power, grid and load usage is fairly consistent no matter what mode I am in. I have tried leaving it in AC Support and it cycles at night and I have disabled AC Support for days at a time. I have been communicating with another member, comparing notes. I would like to hear from others as to how they use their SW4024 and what their battery charging settings are to get a good charge.System consists of SW4024, SCP, Combox, Morningstar PS30 PWM charge controller, 400ah battery bank (4 X 6 volt Lifeline AGMs), solar array.
0 · Share on Twitter