Conext SW and AC Pass Thru Loads
Wondering how much load the SW can Pass thru when in AC Pass thru mode and NOT in Inverter OR AC Support mode. I am sure it is limited to the in and out breaker and wire size connected to it, but is there a limit beyond that? In other words, can the SW actually pass thru any amount of Current / Power, say 4000 or 6000 watts - at least for a few minutes. Maybe even more. Just wondering what the limits of the unit are and what if any effect passing thru high loads might be.
REC TwinPeak 2 285W 3S-3P 2.6kW-STC / 1.9kW-NMOT Array / MN Solar Classic 150 / 2017 Conext SW 4024 Inverter latest firmware / OB PSX-240 Autotransfomer for load balancing / Trojan L16H-AC 435Ah bank 4S connected to Inverter with 7' of 4/0 cable / 24 volt system / Grid-Assist or Backup Solar Generator System Powering 3200Whs Daily / System went Online Oct 2017 / System, Pics and Discussion
0 · Share on Twitter