Fuses plus breakers

Chris11
Chris11 Registered Users Posts: 130 ✭✭
in Solar Beginners Corner #1
I had automotive blade fuses already installed in each of my 3 strings when I added breakers so I left the fuses inline.  Is this a good idea or a bad idea?  Should I remove the fuse holders and fuses?

Thanks.

· Share on Twitter

Comments

  • petertearai
    petertearai Solar Expert Posts: 471 ✭✭✭✭
    #2
    not  the best fuses, so i would remove them 
    2225 wattts pv . Outback 2kw  fxr pure sine inverter . fm80 charge controller . Mate 3. victron battery monitor . 24 volts  in 2 volt Shoto lead carbon extreme batterys. off grid  holiday home 
    · Share on Twitter
  • mcgivor
    mcgivor Solar Expert Posts: 3,854 ✭✭✭✭✭✭
    #3
    Agree, remove them they'renot designed to hold high current for long periods.
    1500W, 6× Schutten 250W Poly panels , Schneider MPPT 60 150 CC, Schneider SW 2524 inverter, 400Ah LFP 24V nominal battery with Battery Bodyguard BMS 
    Second system 1890W  3 × 300W No name brand poly, 3×330 Sunsolar Poly panels, Morningstar TS 60 PWM controller, no name 2000W inverter 400Ah LFP 24V nominal battery with Daly BMS, used for water pumping and day time air conditioning.  
    5Kw Yanmar clone single cylinder air cooled diesel generator for rare emergency charging and welding.
    · Share on Twitter
  • Chris11
    Chris11 Registered Users Posts: 130 ✭✭
    #4
    Thanks...I kinda suspected that would be the suggestion.
    · Share on Twitter

Categories