Talk about hammer the output.

solar_dave
solar_dave Solar Expert Posts: 2,397 ✭✭✭✭
in General Solar Power Topics #1
So I thought I would grab my IR meter and see what the panel temps might be today at 2PM, ambient temps about 101F with a light breeze. The panel frames were showing 137F and the backing about 126F.

Yep peak output off by about 800 to 1000 watts on a 12.5 Kw array.

Oh yeah loads are up as the AC is now in pretty much steady state of 40-50% duty cycle.

Good news at 2PM we are still in the plus column for the day.
· Share on Twitter

Comments

  • jonr
    jonr Solar Expert Posts: 1,386 ✭✭✭✭
    #2
    Re: Talk about hammer the output.

    Was this done with tape on the panel so that the reading was accurate?

    I suppose it's not worth it, but conceptually it is a shame that one might need hot water (for household use) while PV panels are in need of cooling.

    I am available for custom hardware/firmware development

    · Share on Twitter

Categories