Wire Type for Inverter AC output to Power Center Input

gregbyst
gregbyst Registered Users Posts: 38 ✭✭
in PV Installers Forum - NEC, Wiring, Installation #1
I am going to be wiring my inverter into my trailer soon and am wondering what type of cable to get. I heard that solid core Romex will do. Should I use 10/3? 


- 4 of the 12 volt, 200ah AGM renogy batteries (I sent a screenshot of the specs above).
- 150/60 MPPT Epever Charge Controller 
- 3000 watt (9000 peak) inverter/charger/auto-transfer switch
- PV array of 6 260 watt, 30.7 Vmpp, 8.5 Impp. 
- Battery Shunt Monitor (https://www.amazon.com/gp/product/B07FGFFHC6/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1)


Also, I live in a fifth wheel!
· Share on Twitter

Comments

  • Raj174
    Raj174 Solar Expert Posts: 795 ✭✭✭✭
    #2
    It would be helpful if more information were provided. Size of the combined load in amps or watts, size battery bank, and the size of the inverter. 
    4480W PV, MNE175DR-TR, MN Classic 150, Outback Radian GS4048A, Mate3, 51.2V 360AH nominal LiFePO4, Kohler Pro 5.2E genset.
    · Share on Twitter

Categories