XW 6848 PRO sell mode activation

2»

Comments

  • perezj3
    perezj3 Registered Users Posts: 2 ✭
    #32
    Do you know how you solved the situation? I’m going through same thing with xw pro 6848 v1.11.
    · Share on Twitter
  • tampasolar
    tampasolar Registered Users Posts: 65 ✭✭
    #33
    if i recall -- after a firmware change or change in grid code, you need a power cycle reboot.  Not just killing ac power, but also kill the 48v supply from the battery.  Completely die the box and then reboot.
    hybrid: xw6848 pro with two mppt60, 6 kw pv
    17 cell 280ah LiFePO4 storage  14 kw
    gridtie: sunny boy sma 2x 5k
    gridtie: fronius ag5100 5k
    Gateway / Insight Local
    xw4548 backup
    · Share on Twitter
  • perezj3
    perezj3 Registered Users Posts: 2 ✭
    #34
    I called Schneider and I did the hard reset and reboot all with no luck.
    · Share on Twitter

Categories