How and Where to get certified.

System
System Posts: 2,511 admin
in Advanced Solar Electric Technical Forum #1
Hello all,

I am a liscenced electrical contractor located in Atlanta, GA US. I want to start selling and installing solar panels. I am wondering where and how I can get certification and or courses to do so.

thank you,
· Share on Twitter

Comments

  • solartek
    solartek Solar Expert Posts: 69 ✭✭✭✭
    #2
    Re: How and Where to get certified.

    Start here.

    Scott.
    · Share on Twitter
  • niel
    niel Solar Expert Posts: 10,300 ✭✭✭✭
    #3
    Re: How and Where to get certified.

    some of the info here may also be useful to you,
    http://www.dsireusa.org/incentives/index.cfm?re=1&ee=1&spv=0&st=0&srp=1&state=GA
    · Share on Twitter
  • TnAndy
    TnAndy Solar Expert Posts: 249 ✭✭
    #4
    Re: How and Where to get certified.

    NABCEP PV certification is offered at Appalachian State University ( http://www.appstate.edu/ ), I just took the one that was offered in May for entry level certification....there were folks from as far away as Indiana there. It was a two weekend course....Friday evening, Saturday and Sunday all day.

    They have another coming up this fall......and there is a REAL good one day course in July ( 18th I think ) on PV and the NECode.....taught by the guy that writes the Code Corner in Home Power magazine, John Wiles.....probably worth your driving up for.

    Contact Dr. Dennis Scalin at Appy State for more info:

    scanlindm@AppState.edu

    Tell him Andy sent ya.... :D
    · Share on Twitter
  • System2
    System2 Posts: 6,290 admin
    #5
    Re: How and Where to get certified.

    Thank you, all, for your comments. Really helped. Hope I will be able to sign up for the courses sooner then November/December.
    · Share on Twitter

Categories