7.2 kw of panels. Now what?

Options
do_in_itmyway
do_in_itmyway Registered Users Posts: 1 ✭
edited February 2021 in Off Grid Solar & Battery Systems #1
Looking for good information on how to make sense of the information on the panels spec sheet and how it will correlate to a 48v battery bank. 
Tagged:
· Share on Twitter

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #2
    Options
    Please post a pic of the panel data
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter
  • BB.
    BB. Super Moderators, Administrators Posts: 33,439 admin
    #3
    Options
    Can you also tell us a bit more about your planned system?

    Grid Tied or Off Grid or hybrid GT+OG battery back up system?

    Any specific hardware you are looking at (different controllers have different solar array configuration requirements).

    What type of battery (if using batteries), roughly near which major city  (amount of sun, temperature range).

    Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter

Categories