battery wiring

alcatel99
alcatel99 Registered Users Posts: 31 ✭✭
http://www.smartgauge.co.uk/batt_con.htm
has anyone used this method for wiring in series



Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    YES    http://www.smartgauge.co.uk/batt_con.html
     that's the reference we generally send folks to look at, since they explain it pretty well

    But you say SERIES ?   That's pretty simple too, just short cables + to - terminals.  Since each cable will carry full power, they have to be well made and the proper gauge for your application

    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,