Sunpower spr-p17-340-com panels

Options
mickri
mickri Registered Users Posts: 17 ✭✭
in Grid Tie and Grid Interactive Systems #1
Hi,
New here.  I recently bought some sunpower spr-p17-340-com panels from an installer that had gone out of business.  These will be used in a grid tied ground mounted system.  I would like to use micro inverters.  Trying to figure out which inverters will work with these panels.  Did a search on the forum and didn't find anything.  Suggestions please.

Not a complete newbie to solar.  Lived aboard my sailboat with for over 5 years with solar power for electricity.  But that is a completely different ballgame from home solar.
· Share on Twitter

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #2
    Options
    Do the labels on the sunpower panels list anything about grounding, positive or negative ?
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter

Categories