jtj250: GNB absolyte IIP cells and vertical mounting question

System · February 2019

This discussion was created from comments split from: DIY Home Solar Power System.

jtj250 · February 2019

Hello all, I'm new here. I have a million questions but I'll try just starting with one. I have a few sets of GNB absolyte IIP cells and was wondering if or how bad is it to install these in vertically? Post at top 100A33

BB. · February 2019

Welcome to the forum JTJ250,

I have moved your question to your own thread for discussion.

Searching for your battery model, in the mounting manual:

http://www2.exide.com/Media/files/Downloads/IndustAmer/Section 92_61 2015-02 Absolyte GP Installation and Operation Manual.pdf

Section 7.1, page 6

Absolyte batteries are recommended for installation in a horizontal orientation only. However, vertical installation is approved for 50G systems consisting of single cell modules. Figures 6 and 7 are typical arrangements and are not intended to represent all configuration possibilities.

Not sure what a 50G is... Possibly a mounting frame?

Anyway, Appendix D is on page 27.

Here are some more links on those batteries (I think):

http://www2.exide.com/us/en/product-solutions/network-power/product/absolyte-gp.aspx

-Bill

jtj250: GNB absolyte IIP cells and vertical mounting question

Comments

Categories