XW/AGS generator warm up time setting

Options
jtdiesel65
jtdiesel65 Solar Expert Posts: 242 ✭✭✭
in Off Grid Solar & Battery Systems #1
I'm looking for the setting that sets the delay between generator starting and when the inverter places a load on the generator. I thought there was such as setting, but I've looked all over and can't find it. Anyone know if it exists and where it might be?

thx

· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,439 admin
    #2
    Options
    Do you have the AGS "turned on" in the XW? Sometimes, variables are "hidden" until the function is enabled.

    Otherwise, bumping your thread for others who may know, see your question.

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter

Categories