XW/AGS generator warm up time setting

jtdiesel65
jtdiesel65 Solar Expert Posts: 242 ✭✭✭
in Off Grid Solar & Battery Systems #1
I'm looking for the setting that sets the delay between generator starting and when the inverter places a load on the generator. I thought there was such as setting, but I've looked all over and can't find it. Anyone know if it exists and where it might be?

thx

· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,654 admin
    #2
    Do you have the AGS "turned on" in the XW? Sometimes, variables are "hidden" until the function is enabled.

    Otherwise, bumping your thread for others who may know, see your question.

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter

Categories