PS600 Controller

Options
BACCA
BACCA Registered Users Posts: 1 ✭
in Solar Water Pumping #1
I have installed a PS600 controller:
Voltage input is 76 VDC
Amperage running the pump is 2.4A
Wire from Controller to Pump is 12 gauge and it is 60 long
The ambient temperature in 90 to 100 degrees F
The controller operated in the AM but it auto-stops around 11AM restarts in late afternoon.
Is there a ambient thermal protection built into the PSD600?
Are there special controllers build to tropical environments? 
Tagged:
· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,439 admin
    #2
    Options
    Do yo have a link to the (and/or full brand name/model number) controller (PSD or PSxxx)?

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter
  • jonr
    jonr Solar Expert Posts: 1,386 ✭✭✭✭
    #3
    Options
    If it's in the sun, you could add a shield for shade.

    I am available for custom hardware/firmware development

    · Share on Twitter

Categories