Running new Fl washer on Honda eu200i

Options
just starting
just starting Registered Users Posts: 235 ✭✭✭
in Off Grid Solar & Battery Systems #1
Has anyone tried to run a new washer from a Honda EU gen is it possible I will lose 1/3 power in gen due to altitude is it safe for the washer
200ah LiFePO4 24v Electrodacus Sbms40 quad breaker chest freezer to fridge- Samlex PST 1524 - Samlex pst3024  - 1hp shallow well pump-Marey 4.3 GPM on demand waterheater - mama bear Fisher wood burning stove, 30" fridgarair oven ,fridegaire dishwasher  Unique 290l stainless D.C. Fridge-unique 120l portable fridge/freezer 
· Share on Twitter

Comments

  • Brock
    Brock Solar Expert Posts: 639 ✭✭✭✭
    #2
    Options
    I have run our LG front loader and it worked fine, it was interesting to hear the genset ramp up and down as the washer did different things.  :)
    3kw solar PV, 4 LiFePO4 100a, xw 6048, Honda eu2000i, iota DLS-54-13, Tesla 3, Leaf, Volt, 4 ton horizontal geothermal, grid tied - Green Bay, WI
    · Share on Twitter
  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #3
    Options
    LOL  I'm sometimes in the inverter shed when the washer is running, every variation in the load, results in a bit of variation in the transformer hum. I can picture the cycle as it progresses.
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter

Categories