New Flexnet DC Monitoring System by Outback

nigtomdaw
nigtomdaw Solar Expert Posts: 705 ✭✭
Ive just downloaded my latest copy of homepower magazine and saw advertised a very swish modern Advanced Flexnet Dc Monitoring System being advertised by Outback Power, looks cool for all you Outback fans and system owners.8)

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    Re: New Flexnet DC Monitoring System by Outback
    nigtomdaw wrote: »
    Ive just downloaded my latest copy of homepower magazine and saw advertised a very swish modern Advanced Flexnet Dc Monitoring System being advertised by Outback Power, looks cool for all you Outback fans and system owners.8)

    I didn't know Outback needed fans ? (ducks and covers)
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

  • nigtomdaw
    nigtomdaw Solar Expert Posts: 705 ✭✭
    Re: New Flexnet DC Monitoring System by Outback

    Couldnt see anything on the outback site about it,
    MX-60 has a fan .............. dont the inverters ?
  • crewzer
    crewzer Registered Users, Solar Expert Posts: 1,832 ✭✭✭✭
    Re: New Flexnet DC Monitoring System by Outback

    Yep... there's been a some discussion about the imminent FlexNet over on the OutBack forum. It uses the Mate for a display, and it's networked via the Hub. The Mate needs the latest sw (Rev 4.00?).

    More info: http://store.solar-electric.com/oupoflsymo.html

    http://www.outbackpower.com/pdf/specs/flexnet_dc.pdf

    Regards,
    Jim / crewzer