no volts showing
I hope someone can help me. I have put up 4 unisolar 136 watt flexible panels in series. I'm told they are 24Volt panels. I tested them at the end of the 4Y connector, and it is showing 43 volts. I'm thinking this is VOC. When I connect them to the cable that runs to the charge controller, there is 0 volts reading at the end of this cable. It's the same size cable that is on the panels. So nothing is reading to the charge controller. I tried an amp test, using 1 12 volt batteries in series, and I get 0 reading for amps there. I DON'T KNOW WHAT THE DEAL COULD BE. I ran a continuity test on the cable running from the 4Y top the charge controller, and there is continuity. PLEASE I need advice.
0 · Share on Twitter