CPap & BiPap Users Solar Sucess Stories...

Options
Lexicon7
Lexicon7 Solar Expert Posts: 50 ✭✭✭✭
in Solar Beginners Corner #1
Hi Guys, it's a new day and I am very happy to say that I slept all night with my ResMed BiPap Machine operational without a hitch.. I never seem to be able to keep that dam full face mask on but usually log about 3 to 4 hours and did so last night... I also ran a very small digital alarm clock and my system worked great. I know I don't have the kind of components the experts here would like to see but I'm just getting started in solar and my only work so far is installing the 600W Inverter that made it possible. Previous to that, my TC had no inverter so I couldn't use the breathing machine without shore pwr... So for me, it's a very good day.. Hey it's starting to rain... It never rains in California...........!
· Share on Twitter

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #2
    Options
    Re: CPap & BiPap Users Solar Sucess Stories...

    I've used a automotive portable starter pack (jump start battery pack) that had a lighter jack in it, to run my CPAP from.
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter

Categories