Picture loading?

old wind
old wind Registered Users Posts: 15 ✭
in Wind Power Generation #1
I can browes my albums but can't figure out how to load to a post.

Any help will be great. I'm an old guy so I don't get computer speak.

However I try to follow along. I'll get my wife to interpet any responces into english.

Thanks.

Jerry
· Share on Twitter

Comments

  • Cariboocoot
    Cariboocoot Banned Posts: 17,615 ✭✭✭
    #2
    Re: Picture loading?

    Jerry;

    When you post if you scroll down from the top box there's a section "Additional Options" just below it. In that section there are other sub-sections. The second one says "Attach Files" and has a button "Manage Attachments". Click that and you get another screen that will allow you to browse for files on your comp and attach them to the post.
    · Share on Twitter
  • old wind
    old wind Registered Users Posts: 15 ✭
    #3
    Re: Picture loading?
    Cariboocoot wrote: »
    Jerry;

    When you post if you scroll down from the top box there's a section "Additional Options" just below it. In that section there are other sub-sections. The second one says "Attach Files" and has a button "Manage Attachments". Click that and you get another screen that will allow you to browse for files on your comp and attach them to the post.

    Thanks, yes I got to the browes part. I'll give it a go from there.

    Thanks again.

    Jerry
    · Share on Twitter
  • splinter
    splinter Registered Users Posts: 4
    #4
    Re: Picture loading?

    Hi,

    Just got registered today and thought this might be a good thread to practice as I've never been on a forum before!
    Erected a Windtura 750 back in August this year. I've played around with small wind PMA's for few years now and thought it was time to chat about it.
    I saw the instructions on how to post pics. So, I'm gonna give it a twirl.
    I'll try to send a pic of the 750 and mono-pole tower.
    · Share on Twitter
  • Cariboocoot
    Cariboocoot Banned Posts: 17,615 ✭✭✭
    #5
    Re: Picture loading?

    Welcome to the forum, Steve. Looks like you got the picture thing okay. :D
    · Share on Twitter
  • splinter
    splinter Registered Users Posts: 4
    #6
    Re: Picture loading?

    Thanks! It wasn't bad.

    I did noticed that my full name is showing though and I was hoping just splinter would show. I now need to figure out how to change that. I'm concerned though that my name is tied to my whole profile and I'll essentially have to set up a new account.
    I poked around my account and profile and I did not see anywhere to change my user name. Any ideas?

    Tx!
    · Share on Twitter
  • BB.
    BB. Super Moderators, Administrators Posts: 33,654 admin
    #7
    Re: Picture loading?

    Steve,

    [changed per below]

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter
  • splinter
    splinter Registered Users Posts: 4
    #8
    Re: Picture loading?

    Thanks for the help! Is 'splinter' taken? I can remove the sub-name. I was hoping to just see splinter. Possible? Thanks much!
    · Share on Twitter
  • BB.
    BB. Super Moderators, Administrators Posts: 33,654 admin
    #9
    Re: Picture loading?

    By the power vested in me, you are now know as Sir "splinter".

    And, other than signature, location, and a few other fields you fill in... The rest is private (email address, ip address, etc.).

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter
  • splinter
    splinter Registered Users Posts: 4
    #10
    Re: Picture loading?

    I am honored Your Highness! Many thanks for your help from Sir Splinter, the newbee.
    · Share on Twitter
  • niel
    niel Solar Expert Posts: 10,300 ✭✭✭✭
    #11
    Re: Picture loading?

    oh brother, gimme a break.:roll::p
    · Share on Twitter

Categories