Seeking a little help
System
Posts: 2,511 admin
We are doing a commercial install which includes 207 SolarWorld SW230 modules with a SMA ST42 inverter. I have all the string sizing complete but I need a little help in doing the wire sizing. I also need to know if anyone knows of a place I could get a copy of a construction plan or something to look at while I complete the cad drawing.
Comments
-
Re: Seeking a little help
Take a look at Outback Power's Website... They have a bunch of simple electrical drawings for various types of system.
http://outbackpower.com/resources/documents/wiring_diagrams/
By the way, you only need to post once... Forum is small enough where pretty much everyone reads every post.
-BillNear San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
Categories
- All Categories
- 220 Forum & Website
- 128 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 189 Solar Information links & sources, event announcements
- 886 Solar Product Reviews & Opinions
- 254 Solar Skeptics, Hype, & Scams Corner
- 22.3K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 424 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 651 Solar Water Pumping
- 815 Wind Power Generation
- 621 Energy Use & Conservation
- 606 Discussion Forums/Café
- 300 In the Weeds--Member's Choice
- 74 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed