I need help with installation design , breakers ,surge protection and design

Donesinkunmo
Donesinkunmo Registered Users Posts: 1 ✭
in PV Installers Forum - NEC, Wiring, Installation #1
Am going to be installing a 6kva Liberty GXT MT+ online ups for a PRMS unit for a gas turbine.192V DC,3000w solar unit.earthing and lightening arrestor.i need a design,materials ratings,charge controller.should earthing rod be looped with lightening arrestor rod?.thanks
Tagged:
· Share on Twitter

Comments

  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #2
    You are out of my amateur league.  I think you will need a Professional Engineer
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter

Categories