705.12(B)(2)(2) question, please help!

slurry bowl
slurry bowl Registered Users Posts: 34 ✭✭
in PV Installers Forum - NEC, Wiring, Installation #1
I am curious if the wire sizing at locations A and B is different ? This feeder tap NEC stuff always confuses me.


I know it references 705.12(B)(2)(2)
Any input appreciated. 
Thanks.
· Share on Twitter

Comments

  • mcgivor
    mcgivor Solar Expert Posts: 3,854 ✭✭✭✭✭✭
    #2
    Perhaps this link may offer some clarification https://www.electricallicenserenewal.com/Electrical-Continuing-Education-Courses/NEC-Content.php?sectionID=190.0
    1500W, 6× Schutten 250W Poly panels , Schneider MPPT 60 150 CC, Schneider SW 2524 inverter, 400Ah LFP 24V nominal battery with Battery Bodyguard BMS 
    Second system 1890W  3 × 300W No name brand poly, 3×330 Sunsolar Poly panels, Morningstar TS 60 PWM controller, no name 2000W inverter 400Ah LFP 24V nominal battery with Daly BMS, used for water pumping and day time air conditioning.  
    5Kw Yanmar clone single cylinder air cooled diesel generator for rare emergency charging and welding.
    · Share on Twitter

Categories