New Schneider 600vdc Mppt for 6kw+ solar

"we go where power lines don't" Sierra Mountains near Mariposa/Yosemite CA
 http://members.sti.net/offgridsolar/
E-mail [email protected]

Comments

  • Graham ParkinsonGraham Parkinson Registered Users Posts: 57 ✭✭
    Hmm - Is this the mythical two channel MPPT charge controller that Schneider has been working on?

    Not yet available in any retail outlets as far as I can tell and no indications of price - wonder if it will replace the 80-600?

    Offgrid in cloudy PNW

    MacGyver'ed museum collection of panels, castoff batteries and generators - ready for state of art system install ....

  • Dave AngeliniDave Angelini Solar Expert Posts: 5,403 ✭✭✭✭✭
    Mppt - 100a - 600 volt is available at my supplier. I think the store will have it here in the next week. They may take your order and give you an estimated arrival date.

     It is a single mppt that will allow very easy wiring and BOS on a 2 string array in the 6 to 8kw range. I think you are right that it might, down the line replace the 80 amp controller. There is no difference between the two other than higher rated components and a change in the cooling fans control algorithm.
    "we go where power lines don't" Sierra Mountains near Mariposa/Yosemite CA
     http://members.sti.net/offgridsolar/
    E-mail [email protected]

Sign In or Register to comment.