any good software that will help me draw an electrical line drawing of 30 panel 2 CGT inverters?

Any good software that will help me draw an electrical line drawing of 30 panel 2 CGT inverters? 
Last time I used Photoshop, seriously. 
kind of tedius because correcting mistakes was a lot of redrawing but worked. 

Comments

  • mike95490mike95490 Solar Expert Posts: 9,247 ✭✭✭✭✭
    I  used Visio, but I hear Sketchup is good
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

  • rollandelliottrollandelliott Solar Expert Posts: 834 ✭✭
    if unirac combined their software with sunnyboy design I think we would have a winner. I've seen the professional solar installer software I might try that and see if it has what I want. 
  • rollandelliottrollandelliott Solar Expert Posts: 834 ✭✭
    I downloaded Solarius PV, but all their video tutorials are out of date using version 13 of the software and the current verison 15 had a bunch of toosl moved around so it's hard to follow along.  I gave up and just photoshoped my electrical drawing, maybe I will learn it later!
Sign In or Register to comment.