Making a solar panel

System
System Posts: 2,511 admin
in Solar Beginners Corner #1
Hey guys im new to making solar panels and i recently purchased some solar cells for a project at school and would like to know the basic things that i need to get started on making that solar panel. If you guys could help me out i'd be grateful.
· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,634 admin
    #2
    Re: Making a solar panel

    There is at least one good sized thread about making your own solar panels here...

    Good Luck!
    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter
  • mike95490
    mike95490 Solar Expert Posts: 9,583 ✭✭✭✭✭
    #3
    Re: Making a solar panel

    Here's an article I came across, about how an automated factory assembles PV panels.

    http://machinedesign.com/ContentItem/73070/SolarProductionShiftsIntoHighGear.aspx
    or http://tinyurl.com/42wotu

    images are at the bottom of the article. enjoy.


    (added to this thread, because the title seemed better than flea-bay cells)
    Powerfab top of pole PV mount | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister ,

    · Share on Twitter
  • boB
    boB Solar Expert Posts: 1,032 ✭✭✭✭
    #4
    Re: Making a solar panel

    Maybe you could ask Crewzer if you could get a tour of OutBack's new PV module manufacturing facility in Arlington ??

    boB:D
    · Share on Twitter
  • halfcrazy
    halfcrazy Solar Expert Posts: 720 ✭✭✭
    #5
    Re: Making a solar panel

    boB last i heard that was "TOP SECRET". Have they started shipping yet? and are they still frameless?
    · Share on Twitter
  • crewzer
    crewzer Registered Users, Solar Expert Posts: 1,832 ✭✭✭✭
    #6
    Re: Making a solar panel

    I'll be in Arlington Oct 20 - 25... after Solar Power in San Diego... no promises...;)

    Regards,
    Jim / crewzer
    · Share on Twitter
  • boB
    boB Solar Expert Posts: 1,032 ✭✭✭✭
    #7
    Re: Making a solar panel
    halfcrazy wrote: »
    boB last i heard that was "TOP SECRET". Have they started shipping yet? and are they still frameless?

    Naahhh... There's been lots of articles on Silicon Energy now.

    As for the frame vs. no frame, maybe Crewzer will find out. I have no idea.

    Or, (from their web site) you can call call (360)618-6500 for details.

    boB
    · Share on Twitter

Categories