-
Re: newbie looking for reassurance!
I'd suggest checking the voltage label of the panels and when you add panels, split them into 2 strings of 4 - IF the Voc of 4 in series, is less than 100Vdc You use the Voc for your voltage limit, a…2 · -
Re: Kohler 14 RES Generator Locker Rotor: Continuous Issue
Do you have a gmail account, and try uploading the vid to youtube ? post the link here. Or bite the bullet and get a real generator like mine : http://tinyurl.com/LMR-Lister-Running1 · -
Re: Kohler 14 RES Generator Locker Rotor: Continuous Issue
4 psi is MORE than enough. I use simple gravity feed. Many components are not designed for pressure, and easy to flood carb with too much pressure.1 · -
Re: Charge controller output current vs input current
Solar Charge Controllers are designed to work with solar panels as a power source. Adding one to an automotive alternator is not going to work well at all. At best, you will never get to full charge …1 · -
Re: 17.2 volt Vmp panel and Victron MPPT controller
I suspect you may not have high enough PV voltage for MPPT to function, the charger may fall back to PWM. I'd start with 25Vmp as the low voltage needed to have MPPT be successful with a 12V bank. Le…1 ·
