mike95490 ✭✭✭✭✭

If you feel the base is secure and the panels can be joined safely AND the additional hight won't leverage the lower panel off, its ok with me.  ( What state do you drive in ? )

• Activity
• Posts85
• Comments9.5K

• Re: Replacing 12v FLA (450Ah) with 48v AGM (928 Ah) on my vessel

  mike95490

  April 2017
  So, this change is ONLY for the house battery and not the engine & marine electronics ? While underway, how will the 48V bank be charged? 48V Alternator ? 12V engine system running inverter to po…
  1 ·

• Re: Help please....

  mike95490

  March 2017
  But it's much better to get it over and done with, before you start spending $$$
  1 ·

• Re: Conext ComBox - Firmware update released

  mike95490

  January 2015
  Re: Conext ComBox - Firmware update released There were some reports that firmware should be the ONLY file on the memory stick. Also, maybe try changing the brand/size of stick. And the loading was r…
  1 ·

• Re: Quick Grounding Question

  mike95490

  March 2017
  Ground Fault Sensor in a Charge Controller. Your manual will cover it, it may state that the only system ground must be in the controller box, or the wiring diagram sample they print, will show where…
  1 ·

• Re: charging battery bank with generator

  mike95490

  March 2017
  Most inverter chargers have a way to control the charging amps from the generator, So if you have a 8750 genset, it's what 7Kw cont ? I'd set the charger to only pull 5Kw from the genset, …
  1 ·

Previous Next