mcgivor ✭✭✭✭✭✭

  • Re: Off Grid Motor Help

    Reason I asked was it could be powered directly by a panel without needing a controller or battery, but it would be better with a battery, given the use The calculation below is assuming maximum usea…
    ·
  • Re: Grounding Confusion

    The whole grounding issue with regards to mobile applications is open to interpretation, since there should be only one neutral bonding point, a mobile system which is connected to grid via a shore p…
    ·
  • Re: Grounding Confusion

    If connected to a grid source the neutral bonding is taken care of, presumably, so no additional neutral bonding would be required, only if thr system is isolated from the grid would a neutral bondin…
    ·
  • Re: fsdfdsfvdvzv

    Wondered if there was a creative response to an oddball post, now we have it, good one @littleharbor2 
    ·
  • Re: Too much Input Power for my Charge Controller?

    Personally I'm of the opinion that all these branch connectors are a convince to not do the correct method, perhaps they have a use where voltages are high, 600V+, with low currents, however in circu…
    ·