-
Re: Pump won't start on power from Inverter
I'd try it when connected to a known good/charged battery - like your car battery.1 · -
Re: Gen low voltage
Ideally you would also check frequency. Consider bumping up the rpm a little bit (1 hz = ~2 volts unless a voltage regulator is controlling it).1 · -
Re: Combining Solar Panel Strings facing different directions - Virtual Tracking
> any electrical back-feeding between the panel strings You don't need to worry about this. See below for data on virtual tracking working well to extend time (with a single controller): https://f…1 · -
Re: New to solar and this site and a little problem to solve with my generator
If you get a scope, I'd also buy a clamp on amp probe. For example (on ebay): BTMETER 600A Current Clamp Adapter Clamp-On Adapter Meter with Probes I've also fed current sensor output into a laptop a…1 · -
Re: Is it fine to solder ferrules to wire?
> solder will always be a solid connection Unless it heats up too much or causes the wire to break or compresses/creeps and causes a loose connection. If for some odd reason you really want to use…1 ·
