-
Re: MidNite Classic 150 not charging
what is the PV input voltage to the Classic when is is not chargine? What is the state of the Classic, "Resting'? Reason for ressting info here: MidNite Solar Help (midniteftp.com) 7 ea 120 watt…1 · -
Re: Battery Diagnostics
OK, First, the Hydrovolt is a good Hydrormeter. That HV alert on the Classic/s just means that there is another charge source, that has raised the battery voltage, above the setpoint of the Classic, …1 · -
Re: Battery Diagnostics
Paul, Briefly, it appears that your batteries were not fully charged, even at the end of that 90 Amp generator run, as evidenced by the battery charge current (assume that that 90 Amp number was 90 A…1 · -
Re: Help Midnite Solar Classic 150 Experts - Resting not float
Hi ncvo.., Welcome to the Forum. Open the circuit breaker that connects the PV array/s to the Classic, then tell us, what is the Vin reading from the main status screen. This overvoltage is quite exc…1 · -
Re: Want to replace a damaged panel in array -- looking for electrically compatible one.
Hi Fenachrome, It looks like you have swapped the Imp, and the Isc AND the Vmp and Voc, for the SW235. The customary rule-of-thumb for adding strings, or PVs, is that Vmp and Imp should ideally be wi…1 ·
