-
Re: FLA vs AGM
IMHO - the advantage of FLA is that you can measure the Specific Gravity of the battery to understand the SOC and adjust the charging parameters accordingly. To me that's a huge advantage and justifi…1 · -
Re: classic 150, etc versus Schneider Electric Charge controllers
Well this is a good thread for me. I am considering upgrading my charge controller. As I plan to expand my PV array, I am running into current handling limits of my 6AWG PV run. It's a long story but…1 · -
Re: SG cell difference in new Rolls battery bank
Update: I have been following the advice from Rolls tech support and running with the lower Bulk/Absorb voltage of 59.4 and a very long absorb time (& lower End Amps). Basically running absorb un…2 · -
Re: Need to replace my 48V FLA battery bank - should I change technologies?
Its an interesting story that I will write up later for others to learn from. I have been on top of this and didn't really forget anything. Long story short, when I opened the breaker for the charge …1 · -
Re: Need to replace my 48V FLA battery bank - should I change technologies?
I got 5/6 years from them and they were still in good shape until I made a mistake in the fall (October). Because my panels can get snow covered for multiple months at a time, I usually "mothbal…1 ·