Raj174 ✭✭✭✭

  • Re: Inverter low voltage at 12.6 Volts?

    Raj174Raj174
    Hi stmoloud, I believe the low voltage referred to, is the 120 volt output and is sagging due to the load requiring more power than the inverter can handle. I understand that it started the fridge, b…
    ·

  • Re: Lifepo4 replacement quandary

    Raj174Raj174
    If the cells are good, I think all will go well. You just take it one step at a time. When I setup 16 (+1 spare) 195AH cells I balanced them in parallel and then made a 16S bank. Started cycling them…
    ·

  • Re: New battery bank... 1000 a/hr bank or 1300 a/hr bank?

    Raj174Raj174
    The Magnum Energy MS4448PAE 4400 Watt Sine Wave inverter 120/240 Volt should be pretty much a drop in replacement. They sell for $1776.00 here at NAWS. Rick
    ·

  • Re: Battery charging

    Raj174Raj174
    14.2 or 3.55V per cell is a good absorb setting if there is a balancing BMS. The 13.8 reading should continue to drop to 13.4 which is the resting voltage for a fully charged LFP bank. Sounds like yo…
    ·

  • Re: DC Breaker Question

    Raj174Raj174
    I does indicate the + is at the top of the breaker, Found this explanation here on the forum, not your breaker, but should be wired the same. The MNEPV din rail breakers do have a polarity. The + on …
    ·
Avatar