-
Re: Classic 150 Charge controller to 48v bank # of panels max in wattage i can have installed
There is no setup for 10 panels that works, not sure how you are plugging them into the tool. Due to your VMP and VOC only strings of 3 panels works. The voltage doesn't reach the 30% above working …1 · -
Re: combiner box and breaker sizing question
Schneider 865-1032 Conext MPPT Solar Charge Controller | Northern Arizona Wind & Sun (solar-electric.com) OutBack Power FLEXmax FM100-300VDC-AFCI MPPT Solar Charge Controller | Northern Arizona W…1 · -
Re: High voltage on "LOAD" output / Morningstar SunSaver-10 SS-10-12V, solar controller
Batteries A 12 volt battery is a nominal rating. When fully charged a lead acid battery cell is around 2.12 volts. A 12 volt battery is made up of 6 cells so it's fully charged voltage is roughly 12…1 · -
Re: Does this schematic look ok? Any suggestions?
I don't know the rules where you are, but current NEC requires disconnects on the roof for central inverter systems. You may be under different/earlier code, or even out of the US...2 · -
Re: Where to begin: PV Direct or a bigger build
Trying to do PV without batteries is really not possible. Generally they would require special appliances to run directly off DC electric. Inverters would not deal with running through an inverter wi…2 ·
