-
Re: Basic electrics calculations.
To expand on what @Estragon and @mcgivor have said, It is a system, and you need to be able to 'refuel' that top half of the battery. So your array should be properly sized to replace it an…1 · -
Re: Enphase cable repair
I take it they are chewed back to the strain relief? I found a shot of an open M250; Looks simple enough, I'm sure resealing it would be the trick, and if they aren't doing it there would b…1 · -
Re: Thought my bundles of shingles were stiff from being frozen together. Many are melted together...
Use to live in Florida, I suspect they were donated for the write-off after discovering they were stuck together. I'd suggest contacting the manufacturer. If that doesn't help, I've lo…1 · -
Re: Differing readings from charge controller and inverter.
It's not ideal as it is pretty much impossible to keep the resistance the same for each battery. Without the same resistance, the batteries will not share the load evenly. Something you might be…1 · -
Re: Battery sizing for 600W panels
So calculate your loads, we can't do this. Then figure how much charging you will get from your panels, 600 watts using a PWM charge controller, will yield differently depending on the VMP. many…1 ·
