-
Re: How to charge battery bank using charger
The right way, assuming you don't have buss bars for battery connections, is to put the charger cable directly on the battery +/- posts, then the charge controller and inverter. All should have …1 · -
Re: charging battery bank with generator
If you find the tare losses are eating up too much battery capacity, you could consider getting a second, smaller inverter and a lockout panel to run overnight. To conserve pressure tank capacity, I …1 · -
Re: charging battery bank with generator
I'm not familiar with that inverter, but using a smaller generator shouldn't hurt it. You may want to limit charging amps on the inverter and/or avoid running large loads while running the …1 · -
Re: Questions about using the IOTA DLS 55
The charger would normally be connected to battery +/- buss bars if used, or to battery posts otherwise. Buss bars are easier for multiple connections. There should be an appropriately sized breaker …1 · -
Re: Does this sound right
If nothing else, it's a good excuse to clean and re-torque connections.1 ·
