-
Re: Rest in peace my friend.
He started the Midnite forum and was always super informative for installers and integrators. He also was an amateur radio guy, going way back below. K7IQ now SK.2 · -
Re: Maximum generator THD for input to inverter charger - Schneider SW4024 ?
120 vac into L1 only and configure charger settings.1 · -
Re: Conext XW / PDP wall mounting bracket...?
Find something to put under xw to support it and allow convection air flow. That is what I do for moves. Add a shipping strap for safety. That part and the xanbus terminations are only with new equip…1 · -
Re: Controlling pellet stove in off grid system
Sure you can't use propane? No deliveries right? Much easier with gas millivolt ignitions that do not use any inverter power. You could turn on a low power ceiling fan when there. The stoves I have u…1 · -
Re: Conext 4024, dc over voltage with charger enabled
Are you sure all charge settings for the charger are maxed? You could use an external charger and stop the problem. I like Midnite. Not sure if they are 24v. I think your problem here is 24v. You rea…1 ·
