XW Grid tie

halfcrazy
Solar Expert Posts: 720 ✭✭✭
Getting ready to do our first XW Grid tie. we have done several Outbacks but we are really looking forward to this install and the ability to offer generator support. My question is do I need to Network the XW60 and the Inverter? Do they share anything like Outback did with Sellre?
Comments
-
Re: XW Grid tie
They do share info, all you need is a standard cat5 network cable to link them. You should also get the SCP a very useful control panel.
Categories
- All Categories
- 226 Forum & Website
- 134 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 198 Solar Information links & sources, event announcements
- 895 Solar Product Reviews & Opinions
- 255 Solar Skeptics, Hype, & Scams Corner
- 22.4K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2.1K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 428 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 652 Solar Water Pumping
- 815 Wind Power Generation
- 624 Energy Use & Conservation
- 617 Discussion Forums/Café
- 310 In the Weeds--Member's Choice
- 75 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed