Big Mess.. Help figure out the puzzle.
Long story.. will get longer I am sure.. K, I have property in Tx, wind maps ave 9-10mph , The property has heavy wood around the homestead area but about 150ft due north the property is selective cut. My idea is to cut an area of about 2acres (round) and then cut a short path, 100ft wide to homestead area. I will dig a pond in the 2 acre area and place (2) 40ft hand crank towers here and run my electric cable back to the homestead site. Each tower will have a home made 1700 watt generator.(PS still looking for furling plans 8) ) I want to run 10/3 wire on towers and then combine the (2) on size 4g weld cable to the controller and battery house. Is this feasible? I have NO wind without making a clearing of the property which is no problem, and I want the pond as well. Is my cable thickness enough for 100-200ft distance? All of this IS not written in stone.. I am still planning but the property is real so now I am trying to make my off-grid dreams real. Please let me know if more info is needed or if I should take a totally new direction. Any and all suggestions are welcomed.
0 · Share on Twitter