Conext XW / PDP wall mounting bracket...?

ThirstyRoss
ThirstyRoss Registered Users Posts: 20 ✭✭
in PV Installers Forum - NEC, Wiring, Installation #1
Hey all - happy new year!

I am going to be embarking on moving my Conext XW setup from it's original install location to a more suitable location, and I wondered if it was possible to buy additional wall mounting brackets for the XW/PDP as standalone items?

Ideally I could buy and install new brackets and make ready for the move, then the day of the move it will be quicker to do the switchover, and i can just take down and store the old brackets after all is said and done.

Cheers, and hope 2025 treats everyone better than 2024!
· Share on Twitter

Comments

  • Dave Angelini
    Dave Angelini Solar Expert Posts: 6,974 ✭✭✭✭✭✭
    #2
    Find something to put under xw to support it and allow convection air flow. That is what I do for moves. Add a shipping strap for safety. 

    That part and the xanbus terminations are only with new equipment. 

    The bracket has a cad drawing somewhere on the S site.
    "we go where power lines don't" Sierra Nevada mountain area
       htps://offgridsolar1.com/
    E-mail offgridsolar@sti.net

    · Share on Twitter
  • ThirstyRoss
    ThirstyRoss Registered Users Posts: 20 ✭✭
    #3
    That part and the xanbus terminations are only with new equipment.

    Thanks Dave, that's a bit of a shame.  I did search ebay but no random finds there :(

    Find something to put under xw to support it and allow convection air flow. That is what I do for moves. Add a shipping strap for safety.

    Interesting idea...so basically a support so i can get the XW/PDP off the brackets but still leave it operating in roughly the same location, then remove and install the bracket(s) to the new location, then move the XW/PDP?

    · Share on Twitter
  • t00ls
    t00ls Solar Expert Posts: 278 ✭✭✭✭
    #4
    yup...cad drawing and make your own bracket cost a lot less really
    12 panels 6 series 2 parallel, 1 XW60-150 CC, 16 trojan 6V batteries 8 series 2 parallel, 1 XW 6848 pro, 1 5500 watt champion inverter generator( I know...I need a 12Kw )
    · Share on Twitter

Categories