Low voltage Disconnect

wellbuiltwellbuilt Solar Expert Posts: 683 ✭✭✭✭
 Hi all , I was wondering what a good low-voltage disconnect for a 48 volt system with a 430 ah battery . 
 My battery’s are reading 49.9 / 50 volts +- 
 With no in coming power 
 I powered up my microwave for 2 minutes
 and the inverter turned off just shouts of the 2 min ? 
 I’ve never had this happen with my power tools kinda weird  
   My low voltage disconnect is set for 48.8v 
 should it be lower ? Battery’s all have good sg and I went into float yesterday ? 
  Thanks for the reply in advance 

Out back  flex power one  with out back 3648 inverter fm80 charge controler  flex net  mate 16 gc215 battery’s 4425 Watts solar .

Comments

  • BB.BB. Super Moderators, Administrators Posts: 32,008 admin
    See WellBuilt's other thread for combined discussions.

    -Bill "moderator" B.
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
This discussion has been closed.