Easy Rapid Shutdown
Options
billybob9
Registered Users Posts: 141 ✭✭
It seems a company could put themselves right out of business by making things too complicated. In my opinion this is all that's required to Shut down an array. The photos I used are not the right equipment for this kind of job but the basics are there. If you've read all the INFO and comments on RS it's not good. I have it now and wish I could change the NEC requirements to something as easy as the basics shown.
Comments
-
Sorry, I didn't to be redundant and put 2 relays in my picture. Yes at 5K it would be 2 strings and 2 Relays.
Categories
- All Categories
- 243 Forum & Website
- 150 Solar Forum News and Announcements
- 1.4K Solar News, Reviews, & Product Announcements
- 191 Solar Information links & sources, event announcements
- 919 Solar Product Reviews & Opinions
- 256 Solar Skeptics, Hype, & Scams Corner
- 22.5K Solar Electric Power, Wind Power & Balance of System
- 3.6K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2.1K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 438 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 652 Solar Water Pumping
- 829 Wind Power Generation
- 626 Energy Use & Conservation
- 626 Discussion Forums/Café
- 303 In the Weeds--Member's Choice
- 91 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed