About the selection of controller for solar pump
kcbibek310
Registered Users Posts: 21 ✭✭
I have a DC solar pump of rating 2.2 kW and voltage 156 V and a controller set which rating is 175-230V. I want to know what happens if i made connection of solar panel in such a way that its output voltage is 160V. Does motor operate??
Comments
-
I do not know. Do you have a link to your vfd?
Should not hurt to try and see what happens.
-Bill
Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset -
can you show us what exactly do you use with dewalt dcbl720p1?
Categories
- All Categories
- 222 Forum & Website
- 130 Solar Forum News and Announcements
- 1.3K Solar News, Reviews, & Product Announcements
- 192 Solar Information links & sources, event announcements
- 888 Solar Product Reviews & Opinions
- 254 Solar Skeptics, Hype, & Scams Corner
- 22.4K Solar Electric Power, Wind Power & Balance of System
- 3.5K General Solar Power Topics
- 6.7K Solar Beginners Corner
- 1K PV Installers Forum - NEC, Wiring, Installation
- 2.1K Advanced Solar Electric Technical Forum
- 5.5K Off Grid Solar & Battery Systems
- 426 Caravan, Recreational Vehicle, and Marine Power Systems
- 1.1K Grid Tie and Grid Interactive Systems
- 651 Solar Water Pumping
- 815 Wind Power Generation
- 624 Energy Use & Conservation
- 611 Discussion Forums/Café
- 304 In the Weeds--Member's Choice
- 75 Construction
- 124 New Battery Technologies
- 108 Old Battery Tech Discussions
- 3.8K Solar News - Automatic Feed
- 3.8K Solar Energy News RSS Feed