Order Of Connect & Disconnect ?

xyzHollyxyz
xyzHollyxyz Registered Users Posts: 24 ✭✭
in Solar Beginners Corner #1
I am leaving on a big camping trip and hope my solar (2 x 100W) works!! 

Just to be sure - when connecting - BATTERY to the controller first? And when disconnecting, PANEL off first? 

Thanks! 
· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,714 admin
    #2
    For almost all controllers--That is the correct order (battery first to connect, battery last to disconnect).

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter
  • xyzHollyxyz
    xyzHollyxyz Registered Users Posts: 24 ✭✭
    #3
    Thank you!! 
    · Share on Twitter
  • westbranch
    westbranch Solar Expert Posts: 5,183 ✭✭✭✭
    #4
    Is this a portable/packable setup that yo will be dismantling daily?
     
    KID #51B  4s 140W to 24V 900Ah C&D AGM
    CL#29032 FW 2126/ 2073/ 2133 175A E-Panel WBjr, 3 x 4s 140W to 24V 900Ah C&D AGM 
    Cotek ST1500W 24V Inverter,OmniCharge 3024,
    2 x Cisco WRT54GL i/c DD-WRT Rtr & Bridge,
    Eu3/2/1000i Gens, 1680W & E-Panel/WBjr to come, CL #647 asleep
    West Chilcotin, BC, Canada
    · Share on Twitter

Categories