Conduit fill and PV circuits
                
                    slurry bowl                
                
                    Registered Users Posts: 34 ✭✭                
            
                        
            
                    Just to review, when counting current carrying conductors in conduit with PV, DC strings, both wires are counted as CCC. Seems like a definite YES to me. 
Also, when sizing conduit for fill, all conductors are counted in regards to the 40% fill rule for over 3 conductors. Correct?
                        
        
        
      Also, when sizing conduit for fill, all conductors are counted in regards to the 40% fill rule for over 3 conductors. Correct?
Comments
- 
            As I understand code (which is not very much)--Yes, all conductors are counted as if they are carrying current when calculating fill.
Bumping "discussion" in case somebody who knows more than I can add information.
-Bill
Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset 
Categories
- All Categories
 - 232 Forum & Website
 - 140 Solar Forum News and Announcements
 - 1.4K Solar News, Reviews, & Product Announcements
 - 199 Solar Information links & sources, event announcements
 - 899 Solar Product Reviews & Opinions
 - 256 Solar Skeptics, Hype, & Scams Corner
 - 22.5K Solar Electric Power, Wind Power & Balance of System
 - 3.5K General Solar Power Topics
 - 6.7K Solar Beginners Corner
 - 1K PV Installers Forum - NEC, Wiring, Installation
 - 2.1K Advanced Solar Electric Technical Forum
 - 5.6K Off Grid Solar & Battery Systems
 - 428 Caravan, Recreational Vehicle, and Marine Power Systems
 - 1.1K Grid Tie and Grid Interactive Systems
 - 656 Solar Water Pumping
 - 816 Wind Power Generation
 - 624 Energy Use & Conservation
 - 620 Discussion Forums/Café
 - 313 In the Weeds--Member's Choice
 - 75 Construction
 - 124 New Battery Technologies
 - 108 Old Battery Tech Discussions
 - 3.8K Solar News - Automatic Feed
 - 3.8K Solar Energy News RSS Feed