Pole Mount

Zakarume
Zakarume Solar Expert Posts: 143 ✭✭
in Solar Beginners Corner #1
In a few months i am going to upgrade the Pole Mount i am using. What i want to do is mount 2  250 watt Renogy panels in series. I want to use this pole mount http://www.solar-electric.com/solar-panels-mounts-kits-accessories/panel-mounts/twoseunsopam/topofpomo/uni-tp-04.html  Will this be good to use for those panels?
1460 Watts Solar @24v. 675 AH Battery Bank using 12 6v Trojan T-105. 1 Midnite Classic 150. 1500 Watt 24v Samlex Pure Sine Inverter
· Share on Twitter

Comments

  • BB.
    BB. Super Moderators, Administrators Posts: 33,642 admin
    #2
    When you get into engineering for wind loading and such--Use the Iron Ridge configurator (link back from NAWS product page) and talk with NAWS (our host).

    At least for me, I do not have any experience with this type of installation.

    -Bill
    Near San Francisco California: 3.5kWatt Grid Tied Solar power system+small backup genset
    · Share on Twitter

Categories